PERIODO DI CHIUSURA PER FERIE ESTIVE
La Recoverybios chiuderà per ferie dal giorno 11/08/2008 al giorno 31/08/2008 compresi.
Per tutti i dettagli clicca qui. Auguriamo a tutti una FELICE ESTATE!
Enregistre    Oublié pseudo ou mot de passe ? Cliquez ici    
  
Pseudonyme:   Mot de passe:  Login    
Bios Recovery
Choisissez votre langue 
EnglishEnglish ItalianoItaliano FrancaisFrancais DeutscheDeutsch EspanolEspanol
info@recoverybios.com
Mon Panier Mon Recoverybios Enregistre Accès Revendeurs
Home Page Suivi de colis Etat de la Commande Assistance Votre Commentaires Comment nous contacter Qui sommes nous Emploi
PANIER
Le Panier est vide

CATALOGUE
 
1.
2.
3.
4. Modification PSP SLIM & LITE Universel avec installation de Custom Firmware Ver. 4.01 M33-2
5.
 
ASSISTANCE
Conditions de vente
Paiement
Livraison
Garantie
RMA
Privacy
   
INFORMATION
Faq
Guides
Nouvelles
Avis
Suivi de colis
Assistance
Commentaires
Nous contacter
Qui sommes nous
Offres d’emploi
 





Monitor system status - 9/9
  



The graphic interface and the settings of your pc could be different from the ones taken back here. For this reason you refer to the manual of your mother card for greater information and specific settings.


CASE OPEN WARNING [Enable/Disable]

Alternative name: CASE OPENED, CHASSIS INTRUSION.

With this function you can monitor if the case of the pc is open. This option requires an opening sensor on the case.

Current CPU Temperature [°Celsius/°Farenheit]

This voice takes back the indication of the temperature noticed by the sensors in the closeness of the processor. Some mother cards are unprovided of the sensor. Therefore for the survey of the temperature the mother card, which must at least foresee this type of expansion needs buying one separately and connecting it.

NOTA: the temperature sensors are realized with ultraeconomici materials. This justifies the high tolerance on the measures. In more, the real distance between the sensor and the surface of the processor can change from a mother card and the other. He anchors, some sensors are positioned between the fins of the dissipatore, other back the processor, taking a much lower temperature than the real one reached by the heart of the processor; the optimum measure condition foresees the positioning of the sensor to contact with a side of the core, surrounded by a little amount of termoconduttiva pasta which reduces the temperature difference. Therefore The Value Of The Taken Temperature Cannot Be Used For Comparative Purposes but only for a relative verification of the temepratura jerks to which the CPU is exposed.

Current System Temperature [°Celsius/°Farenheit]

This voice takes back the information of the temperature noticed by the sensors on the mother card. Some mother cards are unprovided of the sensor. Therefore for the survey of the temperature the mother card, which must at least foresee this type of expansion needs buying one separately and connecting it. The noticed temperature is that of the air inside of houses, which are obviously not homogeneous in all the zones of the itself one. In particular, above the display card and near the processor the temperature can quietly be higher than 10-15 degrees with respect to the lowest zones of the schassis where air comes in from the outside one.

CPU (FAN 1) Speed (R.P.M.)

This voice takes back the number of turns at the minute of the fan of the processor. The signal travels through the cable of yellow colour, while the red and black cables transport the feeding (12 volts). In case of block of the fan, doing spenere is possible the arranges with the option Off Power at CPU Mistake Fan. Not all of the mother cards allow this option.

System (FAN 2) Speed (R.P.M.)

This voice takes back the number of turns at the minute of the additional fan connected to the mother card. The signal travels through the cable of yellow colour, while the red and black cables transport the feeding (12 volts).

V Core (CPU VOLT)

This voice takes back the measured tension to the chiefs of the lines of power of the processor. The circuit of measure bit of solution, what translated in relative values generally has 8 means a mistake of several or less 0,018 volts, 18 cents of volt. Also in this case the measure is affected with a not negligible mistake which degrades the use of the function to the only purposes of qualitative verfiche.

V I/0 (3.3 VOLT)

This voice takes back the measured tension to the chiefs of the lines of power of the processor. The circuit of measure bit of solution, what translated in relative values generally has 8 means a mistake of several or less 0,018 volts, 18 cents of volt. Also in this case the measure is affected with a not negligible mistake which degrades the use of the function to the only purposes of qualitative verfiche.

V Power (12 VOLT)

This voice takes back the measured tension to the chiefs of the power lines of motorized devices and power ( fans, hard disk, reader cd, etc. ). The circuit of measure bit of solution, what translated in relative values generally has 8 means a mistake of several or less 0,06 volts, 60 cents of volt. Also in this case the measure is affected with a not negligible mistake which degrades the use of the function to the only purposes of qualitative verifying.


info@recoverybios.comTel. (+39) 055 290300 / 055 2608760Fax (+39) 055 2647676

RECOVERYBIOS.COM ver. 3.0
©PCBOX S.R.L., via Camillo Cavour, 68 50129 Firenze ITALIA
C. F. e P. IVA 05662760486
Capitale Sociale 20.000,00 Euro i.v.

| Home Page |